Industrial gloves are usually used for industrial production in factories. Of course, industrial gloves are not only used when producing chemical products. There is a kind of industrial gloves called insulating gloves, which are made of special rubber with good insulation and have sufficient insulation strength and good mechanical properties. But no matter what the material is, gloves will deteriorate over time, so we need to use them correctly and pay attention to the maintenance and management of gloves. The following editor will introduce to you the use and maintenance skills of industrial insulating gloves!
1. Before use, 12KV or 5KV insulating gloves should be reasonably selected according to the working voltage range, and check whether they are within the validity period.
2. Check the surface to see if it is in good condition and whether there is wear, leakage, scratches and other phenomena on the surface. If the adhesive is damaged or leaking, it is strictly prohibited to use. The inspection method of insulating gloves is to hold both sides of the upper mouth of the insulating gloves with both hands, and curl the gloves toward the fingers. When curled to a certain extent, the air inside will increase in pressure due to the decrease in volume. If the fingers are puffed up, there is no air leak.
3. The cuffs of the coat with insulating gloves should be placed in the extended part of the gloves. Use insulating gloves, do not grab items with spikes on the surface to avoid damage. Wearing insulating gloves should not be done for non-electrical work, nor should medical or chemical gloves be used in place of insulating gloves.
4. After the insulating gloves are used, they should be wiped clean inside and out, and then sprinkle some talcum powder after drying to avoid sticking.
5. Insulation gloves are not allowed to be placed in too cold, too hot, direct sunlight or acid-base drugs to prevent the colloid from aging and reduce the insulation performance. Insulated gloves should be tested every 6 months.
